{"product_id":"meteobridge-nano-standard-data-logger","title":"Smartbedded Meteobridge NANO Standard Data Logger","description":"\u003cp\u003eA datalogger upgrade to your Davis Vantage Pro2 or Vantage Vue\u003cbr\u003e\u003cbr\u003eThe Meteobridge NANO is a tiny plug-in device that dramatically extends the features of your Davis Instruments¨ Vantage Pro2 or Vue weather station. The NANO is simply plugged in the expansion connector underneath the cover on the back of the console. When you close the back cover again this upgrade is completely invisible. The NANO adds a full Meteobridge feature set to your weather station setup which includes tons of services you usually need a full PC solution for. The NANO just takes about 1 watt of energy and therefore is dramatically more power efficient than using a PC or even a Raspberry Pi. \u003cbr\u003e\u003cbr\u003eThe NANO connects as a WiFi client to your WLAN at home and can be administrated by a web browser.\u003cbr\u003e\u003cbr\u003eThe NANO supports all weather networks supported by the other Meteobridge solutions. Data uploads to the networks listed below can selected in parallel and can be timed down to every few seconds, if the weather network supports that (like rapid-fire with Weather Underground). Apart from silently uploading data to these networks you also get status information how the uploads were doing. This helps a lot in getting an idea how well your station does feed the networks. NANO does tell you the recent sensor data as received from the Davis weather station and gives you the log when data was uploaded fine or with errors to your weather networks of choice. \u003cbr\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeather Underground\u003c\/li\u003e\n\u003cli\u003eWeather Underground Camera\u003c\/li\u003e\n\u003cli\u003eAWEKAS\u003c\/li\u003e\n\u003cli\u003eCWOP \/ APRS\u003c\/li\u003e\n\u003cli\u003eWeatherForYou\u003c\/li\u003e\n\u003cli\u003eWOW-BE (covering UK and Western Europe)\u003c\/li\u003e\n\u003cli\u003eNetTeere\u003c\/li\u003e\n\u003cli\u003eOpen Weather Map\u003c\/li\u003e\n\u003cli\u003eWeather Cloud\u003c\/li\u003e\n\u003cli\u003eWindfinder\u003c\/li\u003e\n\u003cli\u003eWindguru\u003c\/li\u003e\n\u003cli\u003eIdokep\u003c\/li\u003e\n\u003cli\u003eWeatherflow\u003c\/li\u003e\n\u003cli\u003eWetter.com\u003c\/li\u003e\n\u003cli\u003ePrevimeteo\u003c\/li\u003e\n\u003cli\u003eAnything Weather\u003c\/li\u003e\n\u003cli\u003eMeteonews\u003c\/li\u003e\n\u003cli\u003eCloud Graphing\u003c\/li\u003e\n\u003cli\u003eMeteoplug\u003c\/li\u003e\n\u003cli\u003eMeteobridge Weather CAM\u003c\/li\u003e\n\u003cli\u003eWetterring\u003c\/li\u003e\n\u003cli\u003eWeathercloud\u003c\/li\u003e\n\u003cli\u003eNetworkAmbientweather\u003c\/li\u003e\n\u003cli\u003eAgroclima\u003c\/li\u003e\n\u003cli\u003eCaburŽ in Argentina\u003c\/li\u003e\n\u003cli\u003eNetMeteoagro\u003c\/li\u003e\n\u003cli\u003eWIndy.com\u003c\/li\u003e\n\u003cli\u003eMeteoMap.Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePersonal Web Pages.\u003cbr\u003e\u003cbr\u003eThe NANO has the Weather34 server built in so live data direct from your device, it can also feed the popular personal weather templates WD-Live, Leuven Template, Saratoga Template, Meteo Template and Home Weather Station with default scripts.\u003cbr\u003e\u003cbr\u003eRemote Access\u003cbr\u003e\u003cbr\u003eMeteobridge NANO offers the ability to be reached from the Internet by simply ticking a box on the web interface. \u003cbr\u003e\u003cbr\u003eSMS \/ X (Twitter)\u003cbr\u003e\u003cbr\u003eMeteobridge NANO can send individual SMS via service provider „messagebird“. This can be done in regular intervals or triggered by user-defined events. Content of the SMS can include weather data. The NANO is not limited to SMS but also can 'X' (Twitter) weather information.\u003cbr\u003e\u003cbr\u003eData Logger\u003cbr\u003e\u003cbr\u003eMeteobridge NANO connects to your console via serial communication and handles the authentication needed by the newer versions of the Davis console firmware (known as the green dot logger). The NANO allows for some calibration of sensor data on an easy to understand web settings page. While the NANO is directly making use of the data, it can also be connected by your PC weather program via TCP\/IP on  port 22222 to allow for a direct pass-through to the console. In this mode the NANO acts like a standard Davis logger, but while passing through the data to the PC it also picks the needed pieces of information to feed the services defined in the NANO.\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003ch5\u003eIncluded\u003c\/h5\u003e\n\u003cp\u003eSupplied with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeteobridge NANO\u003c\/li\u003e\n\u003cli\u003eInstruction leaflet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eTechnical \u0026amp; Manual\u003c\/h5\u003e\n\u003cp\u003eMany more details on the NANO can be found on the Meteobridge\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.meteobridge.com\/wiki\/index.php\/Meteobridge_NANO_SD\" target=\"_blank\"\u003eweb page here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe manual supplied with the Meteobridge NANO can be viewed by\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Meteobridge-NANO-SD-Weatherspares.co.uk\" href=\"http:\/\/download.meteobridge.com\/files\/meteobridge-nano-manual-en.pdf\" target=\"_blank\"\u003e\u003cstrong\u003eclicking here.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHardware specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 35mm x 30mm x 10mm (width x height x depth), fits in to the expansion module compartment at the back of the console under the back cover\u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003cli\u003eUp to 300 mA power demand (at 5 V)\u003c\/li\u003e\n\u003cli\u003eOperating temperatures: 0 - 50°C, non-condensing\u003c\/li\u003e\n\u003cli\u003eWiFi 2.4 GHz, 802.11g\/n, internal chip antenna\u003c\/li\u003e\n\u003cli\u003eVoCore2 CPU board\u003c\/li\u003e\n\u003cli\u003eMediatek 7628 AN SOC\u003c\/li\u003e\n\u003cli\u003e128 MB RAM \/ 16 MB flash\u003c\/li\u003e\n\u003cli\u003eStatus LED, reset button\u003c\/li\u003e\n\u003cli\u003e6-pin header maintenance port\u003c\/li\u003e\n\u003cli\u003eCE and RoHS conform\u003c\/li\u003e\n\u003cli\u003eFCC compliant (contains FCC ID 2AC4R-VOCOREV2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Meteobridge","offers":[{"title":"Default Title","offer_id":20218156023904,"sku":"METSTND","price":200.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Meteobridge_NANO_Standard_Data_Logger_1dd6061f-fa7f-b75a-14fa-7aa1c43abac9-compressed.webp?v=1779119655","url":"https:\/\/www.weatherspares.co.uk\/products\/meteobridge-nano-standard-data-logger","provider":"Weather Spares®","version":"1.0","type":"link"}